Rotary Style Toolpath

MattP · June 28, 2021, 1:08am

Hello,

Looking to create a gear using the Rotary path from Fusion 360.

This results in the gcode giving B-9000 so the B table rotates about 25 times before starting the cut.

I will attach or email the gcode if anyone is interested. Looking for a setting in fusion to avoid this winding in and out. And I would like to avoid the technique shown in the impellor sample, for the sake of the finish.

I have combined all of the toolpaths for simulation purposes.

Cheers

MattP · June 28, 2021, 1:17am

Nevermind!!

I read the other thread about the B9999 to B-9999 limits. Which led me to change the settings of the path to be Circle, not Spiral and set the direction to Both Way. Both settings in the Multipasses tab

alexsunny123 · August 14, 2021, 1:26pm

thanks for the awesome information.

alexsunny123 · February 4, 2022, 11:53am

thanks my issue has been fixed.